How To Make Your Own Upcycled Light Bulb Planters

by Barbara-
upcycled-light-bulb-planter

Ivy

I have always wanted to try these light bulb planters ever since I saw one. Michael’s actually carries a light bulb vase which would have easily served my purposes. However buying one is not as fulfilling as making one.

Since we don’t use incandescent light bulbs, I had to purchase them. I got 4 clear bulbs for $2 at the dollar store. Great! I had the light bulbs. Now what? I searched a few websites on how to hollow out light bulbs. I found them quite confusing as they didn’t have step by step instructions with pictures. I decided a video would be better. Just as I started watching a you tube “how-to” video D asked me what I was watching. I told him what I wanted to do with the light bulbs. He was like “Oh, no problem. I can help you with that!”  He went ahead to tell me of how he used to hollow out burnt light bulbs as a child and turn them into oil burners using kerosene and a wick. I was impressed. I quickly fetched the tools and we began working – He as the blue gloved hand at work and me as the director behind the camera.  I hope this step by step guide is detailed and easy enough to follow along.

What You Need

Tools

We used a bolt cutter because we couldn’t find our pliers. It still gets the job done. Also you can use a nail or screw driver in place of the sharp edge thingy we used (sorry, don’t know what it’s called).

Step 1: Take the brass top off

Use the bolt cutter or pliers to pry the edge of the brass top off. Once you have the edges off you can easily pull the brass top off leaving a small hole.

Step 2: Take the black glass off  

The black part is actually glass. Take it off by breaking it. We used the sharp tool to break and scrape off the glass.  Pliers will also do in this case. You can also place the bulb on its side and lightly hit the side with a hammer. The glass shatters into tiny pieces and can land anywhere. Protect your eyes with protective eye wear. If you don’t have one wearing sunglasses even will do. At any time while working, try not to place pressure or squeeze the glass part of the bulb because it might end up breaking before you are even done. If you need to hold it tightly while working, hold the metal neck instead.

Step 3: Remove the fill tube

IMG_0040

The fill tube is a hollow glass tube which you can break with your sharp edge or screw driver.

Step 4: Break the inner glass seal

Place the sharp edge or nail on the glass seal and hammer it just enough to break the glass seal. Once it is broken you can scrape off the extra glass until you have a nice big opening. Turn the bulb up side down and remove all the broken glass in the bulb. You will need tweezers to pull out the filament and guide it out of the opening.

IMG_0045

I used clear light bulbs so I didn’t have to do the extra step of cleaning out the kaolin (that white powdery stuff in frosted bulbs).

Step 6: Rinse and drill holes 

IMG_0047If you are going to use the light bulb as a hanging planter like I did, then you will have to drill holes for the string. Once that is done, the light bulb planter is ready for use. Place plants in the bulb and hang. I used a spider plant which was gifted to me a few months ago. It has grown quite a bit since I got it. Up until now, I was growing it in a glass of water only as a trial as I have not done so with any of my plants. So far so good. The other plants are Ivies. I have not had a lot of luck with them. These were my second attempt. I bought the plant last year and divided them. I think it must have been how I divided them because they have not grown any new leaves since I got them. I was going to get rid of them to make room for new plants, but this way I get to enjoy them as they are even if they don’t grow new leaves.

IMG_0051

And that is it! I really love how they turned out. I have one more hollowed out light bulb which I think will end up being used as a moss terrarium. Have any of you tried this? Share pictures of the finished product below.

sign off

Barbara

Hi, I’m Barbara and I’m a little obsessed with house plants. I share my house plant adventures in the hopes of inspiring you to continue to enjoy the greens in your home. And if you have no plants (yet!) I hope this blog inspires you to add some green to your home. So go on! Try it! I think you might quite like it. And who knows? You may end up being … obsessed too.

18 Comments

  1. Marisol

    What kind of plants work best for this?

    02 . Sep . 2017
    • Barbara

      Any plant you want to grow in water. I use it as a propagation vessel to root plants like ivies, spider plant, succulents etc. pretty much anything that will fit in the opening. Have fun planting!

      04 . Sep . 2017
  2. Alternative Ways to Decorate Home with Flowers - Botanical Deer

    […] green obsessions, my modern met, upcycle that […]

    07 . Jun . 2017
  3. Claire

    So unique and creative! I love the funky style. Great that you took the time to give directions on how to do this – it looks trickier than I would’ve thought. Thanks!

    14 . May . 2017
  4. Ali

    Thanks for that. How long we can keep plant in side the bulb?

    05 . Jan . 2017
    • Barbara

      Ali,
      As long as you want!

      06 . Jan . 2017
  5. 24 OF THE MOST BEAUTIFUL IDEAS ON INDOOR MINI GARDEN TO COLLECT • DIY Tips

    […] Source […]

    25 . Apr . 2016
  6. Awesome Indoor Mini Garden Ideas - DIYCraftsGuru

    […] Source […]

    07 . Apr . 2016
  7. Amazing Ideas to Display Your Indoor Mini Garden

    […] Source […]

    06 . Apr . 2016
  8. 24 of The Most Beautiful Ideas on Indoor Mini Garden to Collect - Homesthetics - Inspiring ideas for your home.

    […] Source […]

    03 . Apr . 2016
  9. Chaotic Itzi

    I need to try this! Thank you so much for the instructions!

    03 . Feb . 2016
    • Barbara

      Absolute you should try it. I use it for rooting stem cuttings.

      03 . Feb . 2016
  10. Denese Ingram

    Thanks for the great step by step directions. I can’t wait to try this project. It looks so unique.

    Thanks again!
    Denese

    30 . Jan . 2016
    • Barbara

      Hope you enjoy making them.

      30 . Jan . 2016
  11. Neg

    This is so lovely !! I know what to do with my next broke bulb. Awesome

    08 . Oct . 2015
    • Barbara

      Thank you. I’m glad you’ve been inspired.

      08 . Oct . 2015
  12. Jacqueline

    think I’ll be trying this very soon!

    30 . Apr . 2015
    • Barbara

      Try it and let me know how it goes!

      30 . Apr . 2015

Leave A Comment

Your email address will not be published. Required fields are marked *